do not scale from this print "a" .010 ref 0.254 (-lc width) .055 1.40 ((no of positions x .0315[.800]) + .0975[2.477]) .003[.08] (typ) 2 max sway "a" "a" -lc: locking clip option lc-08-tm-01 bte-xxx-xx-d fig. 1 cbte-060-01-x-d-lc shown ((no of positions x .0315[.800]) +.1575[4.000]) ref .2350 5.969 ref .1550 ref 3.937 .0080 ref 0.203 ((no of positions -1) x .0315[.800]) .003[.08] .0945 2.400 c3 01 02 cbte-xxx-xx-x-d-xx no of positions -020, -040, -060, -080 -100, -120 *-090 (per row) *-03 body style only row specification -d: double (use bte-xxx-xx-d-x & bteh-xxx-xx-d-x) option -a: alignment pins (use bte-xxx-xx-d-a) -lc: locking clips (use lc-08-tm-01) -k: polyimide film (n/a on styles -07 & -08) (use k-500-300, see fig. 2) plating specification -c: electro-polished selective (use t-1sxx-xx-c) body style -01: .1680[4.267] -02: .2861[7.264] -03: .4042[1.123] -04: .6010[15.265] -05: .7190[18.263] -06: .8370[21.260] -07: .9542 [24.237] -08: 1.1511[29.238] -09: .5224 [13.269] .037 ref 0.94 .280 ref 7.11 "b" .0375 0.953 see table 2 section "a"-"a" c1 c2 .003[.08] .001[.03] (see note 5) t-1s39-xx-x .0350 dia ref 0.889 ((no of positions x .0315[.800]) + .0975[2.477]) ref .0375 ref 0.952 -a: alignment pin option bte-xxx-xx-d-a obsolete .0375 ref 0.953 c sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: .8mm double row terminal assembly by: cbte-xxx-xx-x-d-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing b. perry 10/04/2007 3 1 sheet scale: 1.5:1 insulator: lcp, color: black terminal: phos bronze f:\dwg\misc\mktg\cbte-xxx-xx-x-d-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. burr allowance: .0015[.038] max. 3. minimum pushout force: 6 oz. 4. parts to be mold to position. 5. max variance of .002[.05]. 6. bte-xxx-03-d body can be substituted for bte-xxx-03-d-a. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision b
tube: pt-1-24-01-78 plug: tp-07 packaging view [styles -01, -02 & -03] [parts to have position #1 loaded in same direction as arrow] [load parts with -k option in tube so that the kapton pad is resting on the ribs] this excludes the -01, -02 & -03 lead styles. (no of positions x .0315[.800] + .1575[4.000] ref .275 6.99 ({(no of positions x .0315 [.800] + .1575 [4.000]) -.275 [6.99] }/ 2) .020[.51] .02 0.5 fig. 2 -k: polyimide film pad [use k-500-300] "r" tube: pt-1-24-01-98 plug: tp-26 [styles -04, -05 & -09] tube: pt-1-24-01-105 plug: tp-26 [style -06] [style -07] [style -08] tube: pt-1-24-01-104 plug: tp-26 tube: pt-1-24-02-104 plug: tp-26 sheet of .8mm double row terminal assembly by: cbte-xxx-xx-x-d-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing b. perry 10/04/2007 3 2 sheet scale: 2:1 revision b f:\dwg\misc\mktg\cbte-xxx-xx-x-d-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
.2781 ref 7.064 .055 1.40 "b" "b" -lc: locking clip option fig. 3 cbte-060-06-x-d-lc shown [different as shown, otherwise same as fig. 1] bte-xxx-02-d-a (see note 6, sheet 1) bteh-xxx-xx-d 02 01 -a: alignment pin option [style -04, -05, -06, -07, -08 & -09] bte-xxx-xx-d-a bteh-xxx-xx-d-a .0525 ref 1.334 r (see note 5) "c" .037 ref 0.94 .281 ref 7.14 .0525 1.334 ref section "b"-"b" .003[.08] .001[.03] c4 c5 t-1s51-xx-x see table 2, sheet 1 .2650 6.731 ref sheet of .8mm double row terminal assembly by: cbte-xxx-xx-x-d-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing b. perry 10/04/2007 3 3 sheet scale: 1.5:1 revision b f:\dwg\misc\mktg\cbte-xxx-xx-x-d-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
